LAC-25 双轴控制器
LAC-25 双轴控制器

高速双轴控制器内建驱动器 双轴控制器 内建控制器 单相马达 控制模式: 定位 / 速度/ 力量 12-48 VDC 3安培持续输出, 6安培最大输出 2轴可独立或同时运行 4 个光隔离input,2 个光隔离output 每一轴都有一个模拟输出 RS232界面 技术规范 文件 软件

技術規格

規格

無產品規格選項

控制器

無控制器選項

選項

無選項

技術規範

Description
Stand-Alone 2 Axis Servo Motor Controller / Driver
Operating Modes
Position, Velocity, Torque and Electronic Gearing
Filter Algorithm
PID
Max. Filter Update Rate
100 µS Per Enabled Axis
Trajectory Generator
Trapezoidal, Electronic Gearing
Servo Position Feedback
Incremental Encoder with Index
Output (Standard)
PWM Motor Drive, 3 Amps Cont. and 6 Amps Peak at 50 VDC Max.
PWM Frequency
Approximately 19.531 KHz
Encoder And Index Input
Single-ended or Differential
Encoder Supply Voltage
5 VDC
Encoder Input Voltage
5.5 VDC Max., -0.1 VDC Min.
Encoder Count Rate
2 Million Quadrature Counts per Second
Position Range
32 Bits
Velocity Range
31 Bits
Acceleration Range
31 Bits
General Purpose Digital I/O
4 Optoisolated Inputs, 4 Optoisolated Outputs
Dedicated Digital Inputs
Limit+, Limit-, Home and Fault for each axis
Analog Inputs
5 Channels With 10-Bit Resolution, 3 are user accessible
Analog Outputs
2 Channels With 12-Bit Resolution, ± 10VDC.
Communication Interface
RS-232 Serial Interface, Adjustable Baud Rate, 8 Bits, 1 Stop Bit, No Parity, XON/XOFF Handshake
Supply Voltage
+18 To +50 VDC
Motor Voltage
+12 To +48 VDC
Dimensions
Approximately 7.6“ Long by 3.3“ Wide by 1.1“ Thick
Weight
Approximately 1 Lb.

文件連結

LAC-25 Outline drawing 

LAC-25 CAD drawing 

LAC-25 Manual 

LAC-25 Pinout 

SMAC LAC-X Editor Quick Start Guide 1.01 

軟件

SMAC LAC-X Editor 1.01
Easy setup and tuning of control parameters for LAC-1, LAC-25, LAC-26, LAC-45 and Smart Driver.

Firmware

無Firmware HTML

設置

無設置 HTML

運動範本

無運動範本

回產品列表
CLOSE