LCR 系列

LCR系列是LCA系列延伸出的线性加旋转致动器。这款致动器是安装直接驱动的无刷伺服马达。内建自润式线性滑轨，提供超长的循环寿命。有软着陆以及可程序化的功能，可精准的控制力量 / 扭力、位置、加速度以及速度。软着陆功能 MTBF一亿次的寿命循环真空轴可避免灰尘累积产品控制器＆电缆选项选项文件

技術規格

規格

产品	直流操作电压 (DC)	Size: LxWxH (mm)	行程 (mm)	最大推力 (N)	持续推力 (N)	扭力 (Nm)	转动分辨率	PDF檔	CAD檔
LCR13-025-55-2	24	155x75x13	25	7	2.8	0.047	24K	下載PDF	下載CAD
LCR13-035-15-6	24	180x75x13	35	14	5.6	0.047	24K	下載PDF	下載CAD
LCR13-050-15-6	24	210x75x13	50	14	5.6	0.047	24K	下載PDF	下載CAD
LCR16-025-55-2	24	155x75x16	25	7	2.8	0.047	24K	下載PDF	下載CAD
LCR16-035-15-6	24	180x75x16	35	14	5.6	0.047	24K	下載PDF	下載CAD
LCR16-050-15-6	24	210x75x16	50	14	5.6	0.047	24K	下載PDF	下載CAD
LCR20-025-75-2	48	155x75x20	25	25	10	0.047	24K	下載PDF	下載CAD

控制器

Actuator Models	Single Axis Controller		Dual Axis Controller		Amplifier	Smart Driver
	LAC-1	LCC-10(11)	LAC-26	LAC-25	LAA-5	LAD-1
LCR13/LCR16/LCR20	-	MAH-RED226-03 (with 2x LCC-10)	MAH-RTD226-03	-	-	-

No cable required for flying lead option.

選項

Linear encoder resolutions: 5µm standard, 1µm and 0.1µm optional for most units. Consult factory for availability.

Shaft ends: Male, Female, Blank and Custom (check availability of custom option)

Return spring: Prevents the shaft from dropping during vertical operation when power is cut.

Vacuum: For pick and place applications

Extended nose bushing: For tighter shaft run-out and higher side load onto the shaft.

Increase of max. force and acceleration: 48 volt coil and double coil options are available for some units with 24 volt single coil.

Increase of torque/gear ratio: Alternative geared motors are available. Please consult factory.

Rotary encoder resolution: Consult factory for higher resolution.